• Stainless steel exterior and interior
• Stainless steel pans included
• Electronic temperature controller
• Maintains temperatures between 34°F – 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Heavy duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed casters
• One-piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
• Corner Guards included
• Pull out handles included
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
Additional Information
Weight
218 lbs
Dimensions
33 × 35.63 × 26.6 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MGF8448GR – 36″ Chef Base”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans (see table for size and quantity).
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 19 1/4” deep cutting board is removable for ease of cleaning.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Open spaced interior with no walls between cabinet compartments. Vented stainless steel panel between top pan area and cabinet catches food debris.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 12 1/4” deep cutting board is removable for ease of cleaning.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Black steel exterior with stainless steel interior
• Lighted header panel
• LED interior l
• Black steel exterior with stainless steel interior
• Lighted header panel
• LED interior lighting standard
• Electronic temperature controller
• Four(4) shelves standard per door section
• Double pane glass door(s)
• Self-closing door(s) with automatic stay open feature
• Recessed door handle
• Door lock(s) standard
• Magnetic door gasket
• Self-contained bottom mount refrigeration system with environmentally friendly R290 refrigerant
• Pre-installed casters
• Pre-installed shelves
• NEMA-5-15P plug standard
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
• Stainless steel exterior & interior
• LED interior lights
• Heavy duty Embraco compres
• Stainless steel exterior & interior
• LED interior lights
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between -8°F – 0°F
• Self-closing door(s) with automatic stay open feature
• Recessed door handle
• Magnetic door gasket
• Double pane glass door
• Pre-installed casters
• NEMA-5-15P plug standard
• Four(4) pre-installed shelves per section
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Reviews
There are no reviews yet.