• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 3/4” thick polished steel griddle plate
• 30,000 BTU Burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Weight
414 lbs
Dimensions
28.6 × 48 × 15.2 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATMG-48 – HD 48” Manual Griddle with Total 120,000 BTU” Cancel reply
• Stainless Steel front and sides.
• Compact design for counter top use.
• Heavy, highly pol
• Stainless Steel front and sides.
• Compact design for counter top use.
• Heavy, highly polished steel griddle plate.
• Available in 3/4” (standard) or 1” thickness (optional).
• 3” Splash guard standard.
• 3-1/2” wide Stainless Steel grease trough and a large grease pan.
• 30,000 BTU/hr. steel “U” burners.
• Stainless Steel standing pilots for instant ignition of each burner.
• Durable die cast, chrome plated control knobs.
• Optional 4” legs or equipment stands available.
• One year limited warranty, parts and labor.
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel exterior and interior.
∙ Open spaced interior with no walls between compartments.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Low emissivity double glass panes reflect UV rays for efficient cooling.
∙ Matte finish aluminum door frames.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, die-cast door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Top mount compressor with environmentally friendly R290 refrigerant
• Stainless steel exterio
• Top mount compressor with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between -8°F – 0°F
• LED interior light(s)
• Recessed door handle(s)
• Door lock(s) standard
• Magnetic door gasket(s) standard for positive door seal
• Pre-installed casters
• Three(3) pre-installed shelves standard
• Down duct refrigeration to ensure even distribution of air
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 B
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 BTU burners
• Heavy duty burners with a standing pilot for open top burners
• Heavy duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
Reviews
There are no reviews yet.