• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Dimensions
28.6 × 48 × 15.2 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATTG-48 – HD 48” Thermo-Griddle with 1″ Plate & Total 100,000 BTU”
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style
• Temperature control—individual infinite switch controls each well
• Two type heat elements—500 watt per well and 750 watt per well
• Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload
• Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets
• 18 gauge stainless steel top, body and under shelf
• Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure
• Indicator light of each well shows both power on and element heating
• Mechanical guards on all switches for safety and reliability
• Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately)
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between 33°F - 40°F
• Pre-installed 4” deep stainless steel pans
• 10” cutting board
• Recessed door handle(s)
• Self-closing door(s) with stay open feature
• Magnetic door gasket(s) standard for positive door seal
• One(1) pre-installed shelf per section
• Pre-installed casters
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Open spaced interior with no walls between cabinet compartments. Vented stainless steel panel between top pan area and cabinet catches food debris.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 12 1/4” deep cutting board is removable for ease of cleaning.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
♦ High performance burners, each with output of 30,000 BTU
♦ Infinite heat controls
♦ 5” w
♦ High performance burners, each with output of 30,000 BTU
♦ Infinite heat controls
♦ 5” wide cool-touch stainless steel front plate rail provides safety and knob protection
♦ Stainless steel insulated double-wall body, adjustable legs 4” to 6” and grease drawer with weep hole and baffle; non-skid feet
♦ 3/4” polished steel griddle plate with side and back splash guard
♦ 3-1/2” full width grease trough
♦ Standing pilot ignition system, one per burner
♦ 3/4” rear gas connection with regulator
♦ Conversion kit allows the use of propane or natural gas
♦ CSA listed for commercial and indoor use
♦ One year parts and labor warranty
Reviews
There are no reviews yet.