• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Dimensions
28.6 × 24 × 15.2 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATTG-24 – HD 24” Thermo-Griddle with 1″ Plate & Total 50,000 BTU”
• Stainless steel exterior & interior
• ATHC-9 holds nine(9) 18 X 26 pans and ATHC-18 holds
• Stainless steel exterior & interior
• ATHC-9 holds nine(9) 18 X 26 pans and ATHC-18 holds eighteen(18) 18 X 26 pans
• Heating mode with adjustable temperature settings between 80°F and 220°F
• 1.3” clearance between slides
• Proof mode has 10 adjustments for adjusting humidity level
• Easy to read LED display
• Transparent clear polycarbonate door with 90° stay open feature for loading of product
• Humidifying water tray to prevent loss of moisture and preserve food
• Fully insulated cabinet with environmentally friendly foaming material prevents heat loss, provides energy savings and environmental protection
• Detachable slides and removable control drawer for easy cleaning
• 6’ power cord
• Four(4) casters standard – two locking,two swivel
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Four pre-installed 5" swivel casters with locks on front set.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Textured laminate, black vinyl exterior with galvanized steel interior.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Atosa Glass Lid Curved Top Freezer MMF9110 and MMF9113 are uniquely designed with high value for
• Atosa Glass Lid Curved Top Freezer MMF9110 and MMF9113 are uniquely designed with high value for perfect storage of ice cream and all types of frozen merchandise and seasonal specialties
• Good energy efficiency system with environmentally friendly R290 refrigerant
• High quality refrigeration system that maintains chamber temperature at -10°F to -1°F for best in ice cream and all types of frozen merchandise preservation.
• Chamber temperature display on front shows chamber cooling and food storage status
• Bright LED interior light provide more even lighting throughout the cabinet
• Standard accessory food baskets fully loaded , 3 baskets for MMF9110, 4 baskets for MMF9113
• Cabinet temperature can be adjusted by thermostat easily
• Unit completely pr-wired at factory and ready to connection of power 115/60/1 phase, Cord and plug NEMA-5-15 included
• ETL safety and ETL Sanitation conforms to NSF-7 standard approval for store or display of packaged and bottled products
• 3” good insulation by foamed-in-place high density polyurethane cell insulation
• Door lock standard feature provides security in field.
• Convenient defrost drain for easy cleaning
1 Year Labor and Parts Warranty
5 Year Compressor Warranty
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between 33°F - 40°F
• Pre-installed 4” deep stainless steel pans
• 10” cutting board
• Recessed door handle(s)
• Self-closing door(s) with stay open feature
• Magnetic door gasket(s) standard for positive door seal
• One(1) pre-installed shelf per section
• Pre-installed casters
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Reviews
There are no reviews yet.