Related Products

chef base, everest, 72", ECB72D4, 4 drawer
chef base, everest, 72", ECB72D4, 4 drawer
Everest: ECB72D4 – 72″ (4) Drawer Chef Base Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when re-opening drawers. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ 16-gauge stainless steel worktop is built with unique air chamber and vents that channel heat produced by mounted cooking equipment away from the unit. Additional layer of high grade insulation material withstands extreme heat. These features prevent the worktop from heat-induced warping, keep the cabinet cold and reduce overall energy costs. ∙ Thick gauge stainless steel corner guards keep mounted cooking equipment from sliding off the worktop. ∙ Heavy duty stainless steel grips provide secure maneuverability for the unit. ∙ 12-gauge metal caster brackets support additional weight of mounted cooking equipment. ∙ Six 5" swivel casters with locks on front set and two front leg stabilizers. ∙ A minimum clearance of 6” is required between the cooking equipment’s heating element and the Chef Base worktop. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings. ∙ Snap-in, heat resistant, magnetic drawer gaskets make cleaning and replacement an easy process. ∙ High strength, recessed drawer handles. ∙ NSF certified polycarbonate 4" deep pans. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

freezer, 2 glass door, everest, EMGF48
freezer, 2 glass door, everest, EMGF48
Everest: EMGF48 – 48.0 cu. ft. Reach-In 2 Glass Door Merchandiser Freezer
  ∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R40
∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant. ∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models. ∙ Airflow guard ensures optimal circulation of cold air. R290 models include full-length air duct system. ∙ Time-initiated and temperature-terminated hot gas defrost cycle saves on energy. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Removable and washable condenser coil air filter for R404A models. R290 models do not require condenser coil air filters. ∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors. ∙ Pre-wired power cord without plug, 230V/60Hz/1Ph. ∙ Heavy duty white coated steel interior / exterior. ∙ Open spaced interior with no walls between compartments. ∙ Stainless steel floor interior has rounded corners and detachable drain plug for ease of cleaning. ∙ 2.5" thick high density polyurethane insulation. ∙ Four 5" swivel casters with locks on front set and two front leg stabilizers. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Low emissivity double glass panes reflect UV rays for efficient cooling. ∙ Matte finish aluminum door frames. ∙ Frame heaters prevent exterior moisture build up. ∙ Defroster strips keep glass planes clear and fog-free. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, die-cast door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Four epoxy coated, steel wire shelves with airflow guard per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.

back bar cooler, 48", everest, glass door, EBB48G
back bar cooler, 48", everest, glass door, EBB48G
Everest: EBB48G – 48″ Glass Door Back Bar Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior. ∙ Galvanized steel interior walls and high quality stainless steel floor. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Low emissivity double glass panes reflect UV rays for efficient cooling. ∙ Black PVC door frames. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, die-cast door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

60", everest, display merchandiser, tall, vertical, EOMV-60-B-28-T
60", everest, display merchandiser, tall, vertical, EOMV-60-B-28-T
Everest: EOMV-60-B-28-T – Tall Vertical Open Display Merchandiser
  · Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. · Front air intake and rear air discharge design allows side by side installation. · Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F). · Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption. · High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions. · Large capacity, corrosion-resistant condenser and evaporator coils. · Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. · Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P. · Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass. · Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning. · Galvanized steel top, bottom and rear. · 2.5" thick high-density polyurethane insulation. · Integrated retractable night curtain saves energy and provides security. · 5" swivel casters with locks on front set. Leg stabilizers standard for all models. · Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy · Adjustable by height and angle. Position it flat or slanted downward at 10°. · Heavy duty stainless steel shelves include price tag moldings. · Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less. · Audible overheat protection alarm for compressor and condenser coil. · Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity. · Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet. · Must not be installed in direct sunlight. · In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.