• Stainless steel exterior & interior
• Dixell Digital Controller
• Maintains temperatures between 33°F– 40°F
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant.
• Slide out compressor assembly for easy maintenance
• Recessed door handle(s)
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Door lock(s) standard
• Pre-installed epoxy coated shelves
• Pre-installed castors
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Additional Information
Weight
296 lbs
Dimensions
28.13 × 68 × 40.13 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MBB69GR – 69″ Stainless Steel Back Bar Cooler” Cancel reply
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 B
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 BTU burners
• Heavy duty burners with a standing pilot for open top burners
• Heavy duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Textured laminate, black vinyl exterior with galvanized steel interior.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Three Fixed Speeds
• Gear driven transmission with aluminum alloy gear box
• 30-minute tim
• Three Fixed Speeds
• Gear driven transmission with aluminum alloy gear box
• 30-minute timer
• Safety cut-switch temporarily interrupts power if gears are changed without stopping the mixer
• Easy to reach controls
• Interlocked bowl lift and stainless-steel bowl guard with swing out bowl
• 6’ cord with NEMA 5-15 plug
• Steel body with open base
• Stainless steel bowl
• Stainless steel flat beater
• Stainless steel wire whisk
• Stainless steel spiral dough hook
• Non-slip rubber feet
1 YEAR PARTS AND LABOR WARRANTY (US ONLY)
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style
• Temperature control—individual infinite switch controls each well
• Two type heat elements—500 watt per well and 750 watt per well
• Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload
• Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets
• 18 gauge stainless steel top, body and under shelf
• Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure
• Indicator light of each well shows both power on and element heating
• Mechanical guards on all switches for safety and reliability
• Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately)
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
Reviews
There are no reviews yet.