Atosa Back Bar Cooler, shallow depth, two-section, 48″W x 24-1/2″D x 40-1/8″H, self-contained side mount refrigeration, 11.5 cu. ft. capacity, (2) locking glass doors, stainless steel top, digital temperature control, (4) epoxy coated shelves, stainless steel interior, black exterior, 4″ casters, R290 Hydrocarbon refrigerant, 1/7 HP, 115v/60/1-ph, 2.3 amps, cord with NEMA 5-15P, cETLus, ETL-Sanitation
• Black Exterior & Stainless Steel Interior
• Electronic temperature controller
• Maintains temperatures between 33°F – 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• LED Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Door lock(s) standard
• Pre-installed epoxy coated shelves
• Pre-installed casters
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
Additional Information
Weight
249 lbs
Dimensions
24.5 × 48 × 40.13 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: SBB48GGRAUS2 – 48″ Black Back Bar Cooler With Glass Door Shallow Depth”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Open spaced interior with no walls between compartments.
∙ 16 gauge, high quality stainless steel worktop.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
∙ R290 models include audible overheat protection alarm for compressor and condenser coil.
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless stee
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 33°F – 40°F
• LED interior light(s)
• Recessed door handle(s)
• Door lock(s) standard
• Magnetic door gasket(s) standard for positive door seal
• Pre-installed casters
• Three(3) pre-installed shelves per section
• Down duct refrigeration to ensure even distribution of air
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
· Front air intake and rear air discharge design allows side by side installation.
· Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F).
· Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption.
· High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions.
· Large capacity, corrosion-resistant condenser and evaporator coils.
· Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
· Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P.
· Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass.
· Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning.
· Galvanized steel top, bottom and rear.
· 2.5" thick high-density polyurethane insulation.
· Integrated retractable night curtain saves energy and provides security.
· 5" swivel casters with locks on front set. Leg stabilizers standard for all models.
· Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy.
· Removable 2-tier stainless steel shelf riser.
· Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less.
· Audible overheat protection alarm for compressor and condenser coil.
· Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity.
· Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet.
· Must not be installed in direct sunlight.
· In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.
• Black steel exterior with stainless steel interior
• Maintains temperatures between -8°F –
• Black steel exterior with stainless steel interior
• Maintains temperatures between -8°F – 0°F
• Lighted header panel
• LED interior lighting standard
• Digital controller
• Four(4) shelves standard per section
• Double pane glass door(s)
• Self-closing door(s) with automatic stay open feature
• Recessed door handle
• Door lock(s) standard
• Magnetic door gasket
• Self-contained bottom mount refrigeration system with environmentally friendly R290 refrigerant
• Pre-installed casters
• Pre-installed shelves
• NEMA-5-15P plug standard
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
Reviews
There are no reviews yet.