Related Products

open top, prep table, EOTPS2, mega top, 36", everest
open top, prep table, EOTPS2, mega top, 36", everest
Everest: EOTPS2 – 36″ Mega-Top Open Top Prep Table
  ∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Front air breathing for flexibility in installation. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ 16 gauge, high quality stainless steel worktop and top lids. ∙ Galvanized steel bottom. ∙ 2.5" thick high density polyurethane insulation. ∙ Four 5" swivel casters with locks on front set. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Frame heaters prevent exterior moisture build up. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Mega-top fits three rows of NSF certified polycarbonate 6" deep pans with lids. ∙ Removable 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up. ∙ One epoxy coated, steel wire shelf per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

cookrite, hotplate, 12", ACHP-2, atosa
cookrite, hotplate, 12", ACHP-2, atosa
Atosa: ACHP-2 – HD 12” Two Burner Hotplate with Total 64,000 BTU
  • Stainless steel exterior & interior • Stainless steel full width crumb tray • 32,000 B
• Stainless steel exterior & interior • Stainless steel full width crumb tray • 32,000 BTU burners • Heavy duty burners with a standing pilot for open top burners • Heavy duty cast iron top grates • Independent manual controls for each burner • Stainless steel legs standard • 3/4” NPT rear gas connection and regulator standard 1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)

atosa, cookrite, steam table, CSTEB-5, 5 wells
atosa, cookrite, steam table, CSTEB-5, 5 wells
Atosa: CSTEB-5C – 5 Wells Electric Hot Food Steam Table 3750W/240V
  • Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style • Temperature control—individual infinite switch controls each well • Two type heat elements—500 watt per well and 750 watt per well • Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload • Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets • 18 gauge stainless steel top, body and under shelf • Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure • Indicator light of each well shows both power on and element heating • Mechanical guards on all switches for safety and reliability • Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately) 1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)

back bar cooler, MBB59GR, atosa
back bar cooler, MBB59GR, atosa
Atosa: MBB59GR – 59″ Stainless Steel Back Bar Cooler
  • Stainless steel exterior & interior • Dixell Digital Controller • Maintains temperatur
• Stainless steel exterior & interior • Dixell Digital Controller • Maintains temperatures between 33°F– 40°F • Heavy duty Embraco compressor with environmentally friendly R290 refrigerant. • Slide out compressor assembly for easy maintenance • Recessed door handle(s) • Interior light(s) • Magnetic door gasket(s) standard for positive door seal • Door lock(s) standard • Pre-installed epoxy coated shelves • Pre-installed castors 2 Yr Warranty on all Parts and Labor (US Only) 5 Yr Warranty on Compressor (US Only)