• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• Heavy duty 3/4” thick polished steel griddle plate
• Drip tray provided under burners to catch grease drippings
• 27,000 BTU griddles & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• Available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
Additional Information
Weight
622 lbs
Dimensions
31 × 36 × 57.38 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
Reviews
There are no reviews yet.
Be the first to review “Atosa: AGR-36G – 36” Gas Range. 36” Wide Griddle with One 26” 1/2 Wide Oven”
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Front air breathing for flexibility in installation.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 12 1/4” deep cutting board is removable for ease of cleaning.
∙ One epoxy coated, steel wire shelf per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
•
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• Heavy duty 12” X 12” removable, cast iron top grates
• Drip tray provided under burners to catch grease drippings
• 32,000 BTU top burners & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• Available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style
• Temperature control—individual infinite switch controls each well
• Two type heat elements—500 watt per well and 750 watt per well
• Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload
• Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets
• 18 gauge stainless steel top, body and under shelf
• Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure
• Indicator light of each well shows both power on and element heating
• Mechanical guards on all switches for safety and reliability
• Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately)
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Reviews
There are no reviews yet.