• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• 36” combination ranges with a 24” griddle top with 2 burners
• Heavy duty 3/4” thick polished steel griddle plate
• Drip tray provided under burners to catch grease drippings
• 32,000 BTU top burners, 27,000 BTU griddle & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• AGR-2B24GR and AGR-2B24GL are available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
Additional Information
Weight
607 lbs
Dimensions
31 × 36 × 57.38 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
Reviews
There are no reviews yet.
Be the first to review “Atosa: AGR-2B24GR – 36” Range 2-Burners and 24” Griddle on the right with 26” 1/2 Wide Oven”
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Front air breathing for flexibility in installation.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Mega-top fits three rows of NSF certified polycarbonate 6" deep pans (see table for size and quantity).
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 9 1/8” deep cutting board is removable for ease of cleaning.
∙ One epoxy coated, steel wire shelf per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between 33°F - 40°F
• Pre-installed 4” deep stainless steel pans
• 10” cutting board
• Recessed door handle(s)
• Self-closing door(s) with stay open feature
• Magnetic door gasket(s) standard for positive door seal
• One(1) pre-installed shelf per section
• Pre-installed casters
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
*Stainless Steel Food Pans Included
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
· Front air intake and rear air discharge design allows side by side installation.
· Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F).
· Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption.
· High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions.
· Large capacity, corrosion-resistant condenser and evaporator coils.
· Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
· Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P.
· Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass.
· Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning.
· Galvanized steel top, bottom and rear.
· 2.5" thick high-density polyurethane insulation.
· Integrated retractable night curtain saves energy and provides security.
· 5" swivel casters with locks on front set. Leg stabilizers standard for all models.
· Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy
· Adjustable by height and angle. Position it flat or slanted downward at 10°.
· Heavy duty stainless steel shelves include price tag moldings.
· Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less.
· Audible overheat protection alarm for compressor and condenser coil.
· Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity.
· Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet.
· Must not be installed in direct sunlight.
· In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.
• Three Fixed Speeds
• Gear driven transmission with aluminum alloy gear box
• 30-minute tim
• Three Fixed Speeds
• Gear driven transmission with aluminum alloy gear box
• 30-minute timer
• Safety cut-switch temporarily interrupts power if gears are changed without stopping the mixer
• Number 12 hub accommodates meat grinder or shredder attachments for flexibility between grinding and mixing
• Easy to reach controls
• Interlocked bowl lift and stainless-steel bowl guard with swing out bowl
• 6’ cord with NEMA 5-15 plug
• Steel body with open base
• Stainless steel bowl
• Stainless steel flat beater
• Stainless steel wire whisk
• Stainless steel spiral dough hook
• Non-slip rubber feet
1 YEAR PARTS AND LABOR WARRANTY (US ONLY)
Reviews
There are no reviews yet.