• Stainless steel exterior & interior
• Dixell Digital Controller
• Maintains temperatures between 33°F– 40°F
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant.
• Slide out compressor assembly for easy maintenance
• Recessed door handle(s)
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Door lock(s) standard
• Pre-installed epoxy coated shelves
• Pre-installed castors
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Additional Information
Weight
371 lbs
Dimensions
28.13 × 89.25 × 40.13 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MBB90GR – 90″ Stainless Steel Back Bar Cooler”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Textured laminate, black vinyl exterior with galvanized steel interior.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Units include lava briquettes standard
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
•
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• 60” combination ranges standard with either a 24” or 36” griddle top with 6 or 4 burners
• Heavy duty 3/4” thick polished steel griddle plate
• Drip tray provided under burners to catch grease drippings
• 32,000 BTU top burners, 27,000 BTU griddle & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• AGR-6B24GR and AGR-4B36GR are available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel exterior and interior.
∙ Open spaced interior with no walls between compartments.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Low emissivity double glass panes reflect UV rays for efficient cooling.
∙ Gray PVC door frames.
∙ Self-closes by weight.
∙ Removable doors and stainless steel door tracks make cleaning an easy process.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F.
∙ Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.