• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 33°F – 40°F
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• Stainless steel drip tray(s)
• Recessed door handle(s)
• (1) Dual tap tower(s) standard
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Manifold and ball taps included
• Door lock(s) standard
• Pre-installed caster
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Additional Information
Weight
188 lbs
Dimensions
31.1 × 23 × 54.8 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MKC23GR – 23″ Stainless Steel Keg Cooler with Dual Faucet Tower” Cancel reply
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style
• Temperature control—individual infinite switch controls each well
• Two type heat elements—500 watt per well and 750 watt per well
• Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload
• Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets
• 18 gauge stainless steel top, body and under shelf
• Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure
• Indicator light of each well shows both power on and element heating
• Mechanical guards on all switches for safety and reliability
• Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately)
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop and rails with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Four pre-installed 5" swivel casters with locks on front set.
∙ Built-in caster thread receptacles for all models.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Textured laminate, black vinyl exterior with galvanized steel interior.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ One single faucet, 3" diameter, stainless steel draft arm with matching air distributor. Fully insulated and NSF certified.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Units include lava briquettes standard
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly
• Stainless steel exterior & interior
• Rear mount compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between 33°F - 40°F
• Pre-installed 4” deep stainless steel pans
• 10” cutting board
• Recessed door handle(s)
• Self-closing door(s) with stay open feature
• Magnetic door gasket(s) standard for positive door seal
• One(1) pre-installed shelf per section
• Pre-installed casters
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Reviews
There are no reviews yet.