• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 33°F – 40°F
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• Stainless steel drip tray(s)
• Recessed door handle(s)
• (2) Dual tap tower(s) standard
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Manifold and ball taps included
• Door lock(s) standard
• Pre-installed caster
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Additional Information
Weight
357 lbs
Dimensions
28.1 × 89.3 × 55.6 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MKC90GR – 90″ Stainless Steel Keg Cooler with Dual Faucet Tower”
∙ Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant
∙ Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Compact, easy-access club top compartment.
∙ Built-in caster thread receptacles for all models.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Textured laminate, black vinyl exterior and galvanized steel interior with 1 3/4” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with 3/4” thick high density polyurethane insulation for cub top lids.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength door handles are recessed for doors and raised for club top lids.
∙ Pre-installed door locks keep your items safe from theft.
∙ One single faucet and one dual faucet 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF certified.
∙ One epoxy coated, steel wire shelf.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan for easy cleanup
• Heavy duty cast iron top grates
• Heavy duty cast iron three-ring burner, rated at a total of 80,000 BTU/hr
• Cast iron burners and top grates
• Stainless steel tubing for pilots and pilot tips per burner ring
• Each burner is equipped with two continuous pilots
• Two manual controls to operate the inner and outer rings independently
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Stainless steel exterior & interior
• LED interior lights
• Heavy duty Embraco compres
• Stainless steel exterior & interior
• LED interior lights
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between 33°F – 38°F
• Self-closing door(s) with automatic stay open feature
• Recessed door handle(s)
• Magnetic door gasket
• Double pane glass door
• Pre-installed casters
• NEMA-5-15P plug standard
• Four(4) pre-installed shelves per section
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Reviews
There are no reviews yet.