• Side mount compressor with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 34°F – 40°F
• Stainless steel 1/3 size pans included
• 19” cutting board standard
• Self-closing door(s) with stay open feature
• Recessed door handle(s)
• Magnetic door gasket(s) standard for positive door seal
• Two(2) pre-installed shelves per section
• Pre-installed casters
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
Additional Information
Weight
295 lbs
Dimensions
33.01 × 44 × 44 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MPF8201GR – 44″ Pizza Prep Table”
• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital con
• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital controller
• Maintains Temperatures between 34°F – 40°F degrees
• Heavy Duty Embraco Controller with environmentally friendly R290 Refrigerant
• Heavy Duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed castors
• One-Piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless stee
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 33°F – 40°F
• LED interior light(s)
• Recessed door handle(s)
• Door lock(s) standard
• Magnetic door gasket(s) standard for positive door seal
• Pre-installed casters
• Three(3) pre-installed shelves per section
• Down duct refrigeration to ensure even distribution of air
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings.
∙ Self-closing door with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
∙ High strength, recessed door and drawer handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 19 1/4” deep cutting board is removable for ease of cleaning.
∙ Epoxy coated, steel wire shelves for applicable models.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Black Exterior & Stainless Steel Interior
• Electronic temperature controller
• Mainta
• Black Exterior & Stainless Steel Interior
• Electronic temperature controller
• Maintains temperatures between 33°F– 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• Recessed door handle(s)
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Door lock(s) standard
• Pre-installed epoxy coated shelves
• Pre-installed casters
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
Reviews
There are no reviews yet.