Related Products

59", EBB59, back bar cooler, everest
59", EBB59, back bar cooler, everest
Everest: EBB59 – 59″ Back Bar Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior. ∙ Galvanized steel interior walls and high quality stainless steel floor. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Textured laminate, black vinyl exterior with galvanized steel interior. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

atosa, glass top, chest freezer, MMF9113
atosa, glass top, chest freezer, MMF9113
Atosa: MMF9113 – Glass Curved Top Chest Freezer 12 Cu.Ft
  • Atosa Glass Lid Curved Top Freezer MMF9110 and MMF9113 are uniquely designed with high value for
• Atosa Glass Lid Curved Top Freezer MMF9110 and MMF9113 are uniquely designed with high value for perfect storage of ice cream and all types of frozen merchandise and seasonal specialties • Good energy efficiency system with environmentally friendly R290 refrigerant • High quality refrigeration system that maintains chamber temperature at -10°F to -1°F for best in ice cream and all types of frozen merchandise preservation. • Chamber temperature display on front shows chamber cooling and food storage status • Bright LED interior light provide more even lighting throughout the cabinet • Standard accessory food baskets fully loaded , 3 baskets for MMF9110, 4 baskets for MMF9113 • Cabinet temperature can be adjusted by thermostat easily • Unit completely pr-wired at factory and ready to connection of power 115/60/1 phase, Cord and plug NEMA-5-15 included • ETL safety and ETL Sanitation conforms to NSF-7 standard approval for store or display of packaged and bottled products • 3” good insulation by foamed-in-place high density polyurethane cell insulation • Door lock standard feature provides security in field. • Convenient defrost drain for easy cleaning 1 Year Labor and Parts Warranty 5 Year Compressor Warranty

1", ATTG-36, atosa, cookrite, 36", griddle, thermo
1", ATTG-36, atosa, cookrite, 36", griddle, thermo
Atosa: ATTG-36 – HD 36” Thermo-Griddle with 1″ Plate & Total 75,000 BTU
  • Stainless steel exterior & interior • Stainless steel grease drawer • Heavy duty 1”
• Stainless steel exterior & interior • Stainless steel grease drawer • Heavy duty 1” thick polished steel griddle plate • 25,000 BTU burners per 12” section with standby pilots • Independent manual controls for each 12” section • Stainless steel legs standard • 3/4” NPT rear gas connection and regulator standard 1 Yr Warranty on all Parts and Labor (US Only)

everest, stainless steel, sliding glass door, EBB48G-SD-SS, back bar cooler, 48"
everest, stainless steel, sliding glass door, EBB48G-SD-SS, back bar cooler, 48"
Everest: EBB48G-SD-SS – 48″ Glass Sliding Door Stainless Steel 24″ Depth Back Bar Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel exterior and interior. ∙ Open spaced interior with no walls between compartments. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Low emissivity double glass panes reflect UV rays for efficient cooling. ∙ Gray PVC door frames. ∙ Self-closes by weight. ∙ Removable doors and stainless steel door tracks make cleaning an easy process. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. ∙ Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.