• Stainless steel exterior & interior with reinforced stainless steel top
• Environmentally friendly R290 refrigerant
• Dixell digital controller
• Maintains temperatures between -8°F – 0°F
• Recessed door handle(s)
• Self-closing door(s) with stay open feature
• Magnetic door gasket(s) standard for positive door seal
• Pre-installed casters
• One(1) pre-installed shelf per section
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
Additional Information
Weight
179 lbs
Dimensions
30 × 27.5 × 34.13 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MGF8405GR – 27″ Undercounter Freezer”
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatur
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 33°F – 40°F
• Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• Stainless steel drip tray(s)
• Recessed door handle(s)
• (2) Dual tap tower(s) standard
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Manifold and ball taps included
• Door lock(s) standard
• Pre-installed caster
2 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
∙ R290 models include audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Units include lava briquettes standard
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan for easy cleanup
• Heavy duty cast iron top grates
• Heavy duty cast iron three-ring burner, rated at a total of 80,000 BTU/hr
• Cast iron burners and top grates
• Stainless steel tubing for pilots and pilot tips per burner ring
• Each burner is equipped with two continuous pilots
• Two manual controls to operate the inner and outer rings independently
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Reviews
There are no reviews yet.