• Sleek and strong stainless steel construction for long life and easy maintenance
• All models can be operated using natural or LP gas (conversion kit included)
• Angled sidewalls and bottom plate reflect heat into cooking zone for better and more accurate heat distribution
• Reversible heavy-duty cast iron grilling grates for delicate proteins
• Manually controlled, independent cooking zones and easy-access front panel pilot adjustments
• Countertop units with 20” depth available in four widths: 15”, 24”, 36”, and 48”
• Grates are in individual sections and are designed to be tilted for different heating levels
• Versatile with the ability to alternate between lava rock and radiant cooking methods
• Lava Rock Kit and Holding Rack options available in 24”, 36”, and 48”
• Ergonomically rounded front bullnose and 13/4” sturdy non-marring stainless steel legs
• Industrial metal knobs
Additional Information
Weight
184 lbs
Dimensions
31.5 × 36.5 × 15.75 in
Warranty
2 YR PARTS AND LABOR WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Grindmaster: CCP36 – Countertop Gas Charbroilers”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans (see table for size and quantity).
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 19 1/4” deep cutting board is removable for ease of cleaning.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
· Front air intake and rear air discharge design allows side by side installation.
· Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F).
· Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption.
· High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions.
· Large capacity, corrosion-resistant condenser and evaporator coils.
· Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
· Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P.
· Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass.
· Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning.
· Galvanized steel top, bottom and rear.
· 2.5" thick high-density polyurethane insulation.
· Integrated retractable night curtain saves energy and provides security.
· 5" swivel casters with locks on front set. Leg stabilizers standard for all models.
· Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy
· Adjustable by height and angle. Position it flat or slanted downward at 10°.
· Heavy duty stainless steel shelves include price tag moldings.
· Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less.
· Audible overheat protection alarm for compressor and condenser coil.
· Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity.
· Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet.
· Must not be installed in direct sunlight.
· In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.
♦ High performance burners, each with output of 35,000 BTU
♦ Infinite heat controls
♦ Stainl
♦ High performance burners, each with output of 35,000 BTU
♦ Infinite heat controls
♦ Stainless steel 10 gauge radiant burner covers with field convertible briquette rock kits (sold separately)
♦ Stainless steel insulated double-wall body, adjustable legs 4” to 6” and grease tray; non-skid feet
♦ Heavy-duty reversible cast iron grate, adjusts to three (3) height positions
♦ 5” cool-touch stainless steel front plate rail provides safety and knob protection
♦ 3-1/2” full-width grease trough
♦ Standing pilot ignition system, one per burner
♦ 3/4” rear gas connection with regulator
♦ Conversion kit allows the use of propane or natural gas
♦ CSA listed for commercial and indoor use
♦ One year parts and labor warranty
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening drawers.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ 16-gauge stainless steel worktop is built with unique air chamber and vents that channel heat produced by mounted cooking equipment away from the unit. Additional layer of high grade insulation material withstands extreme heat. These features prevent the worktop from heat-induced warping, keep the cabinet cold and reduce overall energy costs.
∙ Thick gauge stainless steel corner guards keep mounted cooking equipment from sliding off the worktop.
∙ Heavy duty stainless steel grips provide secure maneuverability for the unit.
∙ 12-gauge metal caster brackets support additional weight of mounted cooking equipment.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ A minimum clearance of 6” is required between the cooking equipment’s heating element and the Chef Base worktop.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings.
∙ Snap-in, heat resistant, magnetic drawer gaskets make cleaning and replacement an easy process.
∙ High strength, recessed drawer handles.
∙ NSF certified polycarbonate 4" deep pans.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.