• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Dimensions
28.6 × 48 × 15.2 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATTG-48 – HD 48” Thermo-Griddle with 1″ Plate & Total 100,000 BTU”
• Stainless steel exterior & interior with black frames
• Rear mount compressor with enviro
• Stainless steel exterior & interior with black frames
• Rear mount compressor with environmentally friendly R290 refrigerant
• Dixell digital controller
• Two(2) stainless steel shelves standard
• Defog feature to ensure the glass stays clear
• Maintains temperatures between 33°F – 41° F
• Magnetic door gasket(s) standard for positive door seal
• Two(2) rear sliding doors
• LED interior lighting
• Leveling legs
• Nema 5-15 plug
1 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel exterior and interior.
∙ Open spaced interior with no walls between compartments.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Low emissivity double glass panes reflect UV rays for efficient cooling.
∙ Matte finish aluminum door frames.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, die-cast door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
•
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• Heavy duty 3/4” thick polished steel griddle plate
• Drip tray provided under burners to catch grease drippings
• 27,000 BTU griddles & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• Available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
Reviews
There are no reviews yet.