YOSHIMASA Air Curtains are designed for professional use to keep the desired clean air and temperature inside not to be contaminated by outside air and bad materials such as flying bugs, dust, smoke, odor, insects, poisonous gases, and any possible pollutants. It is commonly installed on both interior and exterior doorways and helps to save energy and keeps sanitary inside climate. Magnetic-door switch & Remote Control are included.
• Power Supply – AC 110V, 60Hz
• Simple installation
• Comes with a Magnetic switch AND a Remote Control
• Balanced Dual shaft Motors
• Clean white color available
• 2 different air speeds control (Hi & Low)
• Max. Wind Speed: 20 (m/s), Air Volume: 1450 CFM, Noise: <=48 dBA
• From 36” to 72” Wide Door(install more than two units for bigger doors)
• Keeps clean, better sanitary climate
• Prevents loss of cool or warm air by keeping outdoor air from entering it
• Saves energy by keeping desired temperature (lowers heating and cooling costs)
• CONFORMS TO NSF/ANSI 37
Additional Information
Weight
42 lbs
Dimensions
8.5 × 35.5 × 9.25 in
Warranty
1 Year Limited Warranty(Excluding Magnetic-door switch, Remote Control)
Reviews
There are no reviews yet.
Be the first to review “Yoshimasa: MIDORI-36 – 36″ Air Curtain”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Open spaced interior with no walls between compartments.
∙ 16 gauge, high quality stainless steel worktop.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior and interior
• Dual valve controls for left and right-side independe
• Stainless steel exterior and interior
• Dual valve controls for left and right-side independent operation
• Two (2) 21,500 BTU high efficiency ceramic infrared burners and standby pilots – totals 43,000 BTU’s
• 1 minute pre-heat time
• 4 position rack adjustments on salamander broiler
• One (1) removable broiler chrome rack
• Removable crumb/grease tray
• Wall mounts directly to the wall without a mounting kit
• Range mounting kit included
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Front air breathing for flexibility in installation.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Mega-top fits three rows of NSF certified polycarbonate 6" deep pans (see table for size and quantity).
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 9 1/8” deep cutting board is removable for ease of cleaning.
∙ One epoxy coated, steel wire shelf per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Front air breathing for flexibility in installation.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 12 1/4” deep cutting board is removable for ease of cleaning.
∙ One epoxy coated, steel wire shelf per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.