Atosa Back Bar Cooler, shallow depth, two-section, 68″W x 24-1/2″D x 40-1/8″H, self-contained side mount refrigeration, 18.6 cu. ft. capacity, (2) locking solid doors, stainless steel top, digital temperature control, (4) epoxy coated shelves, stainless steel interior, black exterior, 4″ casters, R290 Hydrocarbon refrigerant, 1/7 HP, 115v/60/1-ph, 2.3 amps, cord with NEMA 5-15P, cETLus, ETL-Sanitation
• Black Exterior & Stainless Steel Interior
• Electronic temperature controller
• Maintains temperatures between 33°F– 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Slide out compressor assembly for easy maintenance
• Recessed door handle(s)
• Interior light(s)
• Magnetic door gasket(s) standard for positive door seal
• Door lock(s) standard
• Pre-installed epoxy coated shelves
• Pre-installed casters
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
Additional Information
Weight
276 lbs
Dimensions
24.5 × 68 × 40.13 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: SBB69GRAUS2 – 69″ Black Back Bar Cooler Shallow Depth”
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Textured laminate, black vinyl exterior with galvanized steel interior.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F.
∙ Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Side mount compressor with environmentally friendly R290 refrigerant
• Stainless steel exteri
• Side mount compressor with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Dixell digital controller
• Maintains temperatures between 34°F – 40°F
• Stainless steel 1/3 size pans included
• 19” cutting board standard
• Self-closing door(s) with stay open feature
• Recessed door handle(s)
• Magnetic door gasket(s) standard for positive door seal
• Two(2) pre-installed shelves per section
• Pre-installed casters
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Units include lava briquettes standard
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
∙ Galvanized steel interior walls and high quality stainless steel floor.
∙ 1 3/4" thick high density polyurethane insulation.
∙ Built-in caster thread receptacles for all models.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Low emissivity double glass panes reflect UV rays for efficient cooling.
∙ Black PVC door frames.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, die-cast door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F.
∙ Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.