Related Products

sierra, srmg-24, griddle, gas
sierra, srmg-24, griddle, gas
Sierra: SRMG-24 – 24″ Gas Griddle
  • All non-ferrous stainless steel construction: interior, exterior, front, sides, landing ledge an
• All non-ferrous stainless steel construction: interior, exterior, front, sides, landing ledge and valve controls • Heavy gauge welded front frame • “U” shaped burners rated at 23,000 BTU/hr. Located every 12” for even heat distribution on griddle surface • 4” wide grease trough for easy cleaning • Removable grease tray with weep hole • One stainless steel standing pilot for each flute for instant ignition • Aeration baffles between “U” shaped burners to provide uniform surface temperature • Highly polished 3/4" thick steel griddle plates* • Back and side splashes are welded to griddle plate for easy cleaning Compact design for counter top use • 4" S/S adjustable legs and 1" levelling feet included • Features a full 6” landing edge for increased plate stability • The SRMG is shipped from the factory, ready for natural gas installation. An LP conversion kit is included with each unit

american range armg-24, griddle, gas
american range armg-24, griddle, gas
American Range: ARMG-24 – 24″ Gas Manual Griddle
  • Stainless Steel front and sides. • Compact design for counter top use. • Heavy, highly pol
• Stainless Steel front and sides. • Compact design for counter top use. • Heavy, highly polished steel griddle plate. • Available in 3/4” (standard) or 1” thickness (optional). • 3” Splash guard standard. • 3-1/2” wide Stainless Steel grease trough and a large grease pan. • 30,000 BTU/hr. steel “U” burners. • Stainless Steel standing pilots for instant ignition of each burner. • Durable die cast, chrome plated control knobs. • Optional 4” legs or equipment stands available. • One year limited warranty, parts and labor.

sierra, srf-40/50, fryer, gas
sierra, srf-40/50, fryer, gas
Sierra: SRF-40/50-NG – 45-50 LB Gas Fryer
  • Welded 16 gauge stainless steel tank with a super smooth machine finish ensures easy cleaning �
• Welded 16 gauge stainless steel tank with a super smooth machine finish ensures easy cleaning • Stainless steel front, door and sides, with a galvanized back • Long lasting baffles are mounted in the 3 heat exchange tubes to provide maximum heating and combustion efficiency • Standing pilot light design provides a ready flame when heat is required • Integrated gas control valve acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator and automatic main valve • Robertshaw snap action millivolt thermostat control adjusts from 200°F-400°F. No electrical hookup required. • Hi-limit shut-off protector shuts off gas combination valve and standing pilot. • Built-in heat deflector • Two nickel chrome plated oblong wire mesh baskets, with vinyl coated heat protection handles • One nickel chrome plated tube rack and drain extension • 6” adjustable stainless steel legs • The SRF-40/50 is shipped from the factory, ready for natural gas installation. An LP conversion kit is included with each unit.

steam table, gas, duke, 303
steam table, gas, duke, 303
Duke: 303 – 3 Wells Gas Aerohot Steamtable Hot Food Unit
  „„• 20 gauge, stainless steel „„• Die-stamped openings - 12” x 20” „„• Poly carvin
„„• 20 gauge, stainless steel „„• Die-stamped openings - 12” x 20” „„• Poly carving board - 7”W x 1/2” thick with 18 gauge stainless steel support shelf and die-stamped brackets „• Natural or Propane, as specified „• Galvanized steel radiation plate in each compartment „• Gas pressure regulator furnished in each unit „• Burners controlled by adjustable valve