♦ High performance burners, each with output of 30,000 BTU
♦ Infinite heat controls
♦ 5” w
♦ High performance burners, each with output of 30,000 BTU
♦ Infinite heat controls
♦ 5” wide cool-touch stainless steel front plate rail provides safety and knob protection
♦ Stainless steel insulated double-wall body, adjustable legs 4” to 6” and grease drawer with weep hole and baffle; non-skid feet
♦ 3/4” polished steel griddle plate with side and back splash guard
♦ 3-1/2” full width grease trough
♦ Standing pilot ignition system, one per burner
♦ 3/4” rear gas connection with regulator
♦ Conversion kit allows the use of propane or natural gas
♦ CSA listed for commercial and indoor use
♦ One year parts and labor warranty
♦ Solid 1/2” thick polished steel plate for fast heat up and high heat retention
♦ Heavy gaug
♦ Solid 1/2” thick polished steel plate for fast heat up and high heat retention
♦ Heavy gauge stainless steel body, and sloped side & 3” backsplash
♦ Large volume removable grease drawer with weep hole and baffle
♦ Heavy duty, stainless steel adjustable legs for stability
♦ Compatible for 1-phase or 3-phase operation (field convertible EGD-24M & EGD-36M)
♦ 3-1/4” full width grease trough
♦ EGD-16M: One (1) thermostatically controlled heat zone
♦ EGD-24M: Two (2) thermostatically controlled heat zones
♦ EGD-36M: Three (3) thermostatically controlled heat zones
♦ One year parts and labor warranty
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ NSF certified polycarbonate 6" deep pans (see table for size and quantity).
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 19 1/4” deep cutting board is removable for ease of cleaning.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.