Related Products

atosa, cookrite, steam table, CSTEA-4, 4 wells
atosa, cookrite, steam table, CSTEA-4, 4 wells
Atosa: CSTEA-4C – 4 Wells Electric Hot Food Steam Table 2000W/120V
  • Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style • Temperature control—individual infinite switch controls each well • Two type heat elements—500 watt per well and 750 watt per well • Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload • Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets • 18 gauge stainless steel top, body and under shelf • Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure • Indicator light of each well shows both power on and element heating • Mechanical guards on all switches for safety and reliability • Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately) 1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)

atosa, 3 door refrigerator, MBF8006GR, top mount
atosa, 3 door refrigerator, MBF8006GR, top mount
Atosa: MBF8006GR – Top Mount (3) Three Door Refrigerator
  • Top mount compressor with environmentally friendly R290 refrigerant • Stainless steel exterio
• Top mount compressor with environmentally friendly R290 refrigerant • Stainless steel exterior & interior • Dixell digital controller • Maintains temperatures between 33°F – 40°F • LED interior light(s) • Recessed door handle(s) • Door lock(s) standard • Magnetic door gasket(s) standard for positive door seal • Pre-installed casters • Three(3) pre-installed shelves per section • Down duct refrigeration to ensure even distribution of air 2 Yr Warranty on all Parts and Labor (US Only) 5 Yr Warranty on Compressor (US Only)

60", everest, prep table, 4 drawer, EPBNWR2-D4
60", everest, prep table, 4 drawer, EPBNWR2-D4
Everest: EPBNWR2-D4 – 60″ (4) Drawer Sandwich Prep Table
  ∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Front air breathing for flexibility in installation. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ 16 gauge, high quality stainless steel worktop, lid and hood. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ Four 5" swivel casters with locks on front set. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Frame heaters prevent exterior moisture build up. ∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings. ∙ Self-closing door with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process. ∙ High strength, recessed door and drawer handles. ∙ NSF certified polycarbonate 6" deep pans. ∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up. ∙ 12 1/4” deep cutting board is removable for ease of cleaning. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

atosa, pizza prep table, MPF8201GR
atosa, pizza prep table, MPF8201GR
Atosa: MPF8201GR – 44″ Pizza Prep Table
  • Side mount compressor with environmentally friendly R290 refrigerant • Stainless steel exteri
• Side mount compressor with environmentally friendly R290 refrigerant • Stainless steel exterior & interior • Dixell digital controller • Maintains temperatures between 34°F – 40°F • Stainless steel 1/3 size pans included • 19” cutting board standard • Self-closing door(s) with stay open feature • Recessed door handle(s) • Magnetic door gasket(s) standard for positive door seal • Two(2) pre-installed shelves per section • Pre-installed casters 2 Year Labor and Parts Warranty 5 Year Compressor Warranty