• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Dimensions
28.6 × 36 × 15.2 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATTG-36 – HD 36” Thermo-Griddle with 1″ Plate & Total 75,000 BTU”
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
· Front air intake and rear air discharge design allows side by side installation.
· Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F).
· Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption.
· High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions.
· Large capacity, corrosion-resistant condenser and evaporator coils.
· Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
· Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P.
· Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass.
· Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning.
· Galvanized steel top, bottom and rear.
· 2.5" thick high-density polyurethane insulation.
· Integrated retractable night curtain saves energy and provides security.
· 5" swivel casters with locks on front set. Leg stabilizers standard for all models.
· Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy
· Adjustable by height and angle. Position it flat or slanted downward at 10°.
· Heavy duty stainless steel shelves include price tag moldings.
· Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less.
· Audible overheat protection alarm for compressor and condenser coil.
· Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity.
· Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet.
· Must not be installed in direct sunlight.
· In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Stainless steel exterior and interior
• 35,000 BTU stainless steel burners with standby pilot
• Independent manual controls every 12”
• Heavy-duty, reversible cast iron grates
• Top grates are adjustable multi-level
• Adjustable, stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
• Power Supply - AC 110V, 60Hz
• Simple installation
• Comes with a Magnetic switch AND a Re
• Power Supply - AC 110V, 60Hz
• Simple installation
• Comes with a Magnetic switch AND a Remote Control
• Balanced Dual shaft Motors
• Clean white color available
• 2 different air speeds control (Hi & Low)
• Max. Wind Speed: 20 (m/s), Air Volume: 1450 CFM, Noise: <=48 dBA
• From 36” to 72” Wide Door(install more than two units for bigger doors)
• Keeps clean, better sanitary climate
• Prevents loss of cool or warm air by keeping outdoor air from entering it
• Saves energy by keeping desired temperature (lowers heating and cooling costs)
• CONFORMS TO NSF/ANSI 37
• Stainless steel exterior and interior
• Dual valve controls for left and right-side independe
• Stainless steel exterior and interior
• Dual valve controls for left and right-side independent operation
• Two (2) 21,500 BTU high efficiency ceramic infrared burners and standby pilots – totals 43,000 BTU’s
• 1 minute pre-heat time
• 4 position rack adjustments on salamander broiler
• One (1) removable broiler chrome rack
• Removable crumb/grease tray
• Wall mounts directly to the wall without a mounting kit
• Range mounting kit included
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Reviews
There are no reviews yet.