• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital controller
• Maintains Temperatures between 34°F – 40°F degrees
• Heavy Duty Embraco Controller with environmentally friendly R290 Refrigerant
• Heavy Duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed castors
• One-Piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
Additional Information
Weight
364 lbs
Dimensions
33 × 72.4 × 26.6 in
Warranty
2 YR PARTS AND LABOR WARRANTY, 5 YR COMPRESSOR PART WARRANTY
Reviews
There are no reviews yet.
Be the first to review “Atosa: MGF8453GR – 72″ Chef Base”
• Black exterior cabinet with black door frame and white interior
• Environmentally friendly R6
• Black exterior cabinet with black door frame and white interior
• Environmentally friendly R600a refrigerant
• CTD-3/CTD-5 are forced air cooling and CTD-3S is cold wall cooling
• Foamed-in-place high density polyurethane insulation
• Double pane glass door with recessed door handle
• Door lock standard
• Mechanical controller
• Pre-installed removable PVC coated wire shelves standard
• Certified for packaged foods and bottled beverages
• Maintains temperatures between 33°F- 41°F
• Magnetic door gasket standard for positive door seal
• LED interior lighting
• Leveling legs
• 5’ cord with NEMA 5-15 plug standard
1 Yr Warranty on all Parts and Labor (US Only)
5 Yr Warranty on Compressor (US Only)
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan
• Stainless steel sides and front valve cover
• Full width, removable stainless steel drip pan for easy cleanup
• Heavy duty cast iron top grates
• Heavy duty cast iron three-ring burner, rated at a total of 80,000 BTU/hr
• Cast iron burners and top grates
• Stainless steel tubing for pilots and pilot tips per burner ring
• Each burner is equipped with two continuous pilots
• Two manual controls to operate the inner and outer rings independently
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening drawers.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ 16-gauge stainless steel worktop is built with unique air chamber and vents that channel heat produced by mounted cooking equipment away from the unit. Additional layer of high grade insulation material withstands extreme heat. These features prevent the worktop from heat-induced warping, keep the cabinet cold and reduce overall energy costs.
∙ Thick gauge stainless steel corner guards keep mounted cooking equipment from sliding off the worktop.
∙ Heavy duty stainless steel grips provide secure maneuverability for the unit.
∙ 12-gauge metal caster brackets support additional weight of mounted cooking equipment.
∙ Six 5" swivel casters with locks on front set and two front leg stabilizers.
∙ A minimum clearance of 6” is required between the cooking equipment’s heating element and the Chef Base worktop.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings.
∙ Snap-in, heat resistant, magnetic drawer gaskets make cleaning and replacement an easy process.
∙ High strength, recessed drawer handles.
∙ NSF certified polycarbonate 4" deep pans.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior & interior
• Stainless steel grease drawer
• Heavy duty 1” thick polished steel griddle plate
• 25,000 BTU burners per 12” section with standby pilots
• Independent manual controls for each 12” section
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Reviews
There are no reviews yet.