Related Products

EBB90-24, back bar cooler, everest, 90"
EBB90-24, back bar cooler, everest, 90"
Everest: EBB90-24 – 90″ Back Bar Refrigerator 24″ Depth
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior. ∙ Galvanized steel interior walls and high quality stainless steel floor. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Textured laminate, black vinyl exterior with galvanized steel interior. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. ∙ Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

chef base, 60", everest, 2 drawer, ECB52-60D2
chef base, 60", everest, 2 drawer, ECB52-60D2
Everest: ECB52-60D2 – 60″ (2) Drawer Chef Base Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when re-opening drawers. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ 16-gauge stainless steel worktop is built with unique air chamber and vents that channel heat produced by mounted cooking equipment away from the unit. Additional layer of high grade insulation material withstands extreme heat. These features prevent the worktop from heat-induced warping, keep the cabinet cold and reduce overall energy costs. ∙ Thick gauge stainless steel corner guards keep mounted cooking equipment from sliding off the worktop. ∙ Heavy duty stainless steel grips provide secure maneuverability for the unit. ∙ 12-gauge metal caster brackets support additional weight of mounted cooking equipment. ∙ Four 5" swivel casters with locks on front set and two front leg stabilizers. ∙ A minimum clearance of 6” is required between the cooking equipment’s heating element and the Chef Base worktop. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings. ∙ Snap-in, heat resistant, magnetic drawer gaskets make cleaning and replacement an easy process. ∙ High strength, recessed drawer handles. ∙ NSF certified polycarbonate 4" deep pans. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

back bar cooler, everest, solid door, 59", stainless steel, EBB59-SS
back bar cooler, everest, solid door, 59", stainless steel, EBB59-SS
Everest: EBB59-SS – 59″ Stainless Steel Door Back Bar Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel exterior and interior. ∙ Open spaced interior with no walls between compartments. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Stainless steel exterior and galvanized interior. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

EBWF1, bottom mount, 1 door, reach in, freezer, everest, wide
EBWF1, bottom mount, 1 door, reach in, freezer, everest, wide
Everest: EBWF1 – 1 Door Bottom Mounted Wide Reach-In Freezer
  ∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R40
∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant. ∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models. ∙ Airflow guard ensures optimal circulation of cold air. R290 models include full-length air duct system. ∙ Time-initiated and temperature-terminated auto defrost heater. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ Galvanized steel top, bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ Deeper cabinet interior for more storage options. ∙ Four 5" swivel casters with locks on front set and two front leg stabilizers. ∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Frame heaters prevent exterior moisture build up. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Three epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F. ∙ R290 models include audible overheat protection alarm for compressor and condenser coil.