• 20 gauge, stainless steel
• Die-stamped openings - 12” x 20”
• Poly carving board - 7”W x 1/2” thick with 18 gauge stainless steel support shelf and die-stamped brackets
• Natural or Propane, as specified
• Gas safety pilots standard
• Gas pressure regulator furnished in each unit
• Burners controlled by adjustable valve
• Stainless steel exterior and interior
• Stainless steel pans included
• Electronic tempera
• Stainless steel exterior and interior
• Stainless steel pans included
• Electronic temperature controller
• Maintains temperatures between 34°F – 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Heavy duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed casters
• One-piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
• Corner Guards included
• Pull out handles included
2 YEAR PARTS AND LABOR WARRANTY (US ONLY)
5 YEAR COMPRESSOR PART WARRANTY (US ONLY)
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
· Front air intake and rear air discharge design allows side by side installation.
· Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F).
· Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption.
· High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions.
· Large capacity, corrosion-resistant condenser and evaporator coils.
· Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
· Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P.
· Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass.
· Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning.
· Galvanized steel top, bottom and rear.
· 2.5" thick high-density polyurethane insulation.
· Integrated retractable night curtain saves energy and provides security.
· 5" swivel casters with locks on front set. Leg stabilizers standard for all models.
· Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy.
· Removable 2-tier stainless steel shelf riser.
· Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less.
· Audible overheat protection alarm for compressor and condenser coil.
· Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity.
· Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet.
· Must not be installed in direct sunlight.
· In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings.
∙ Self-closing door with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
∙ High strength, recessed door and drawer handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 19 1/4” deep cutting board is removable for ease of cleaning.
∙ Epoxy coated, steel wire shelves for applicable models.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.