Related Products

everest, 4 drawer, ECB82D4, 82", chef base
everest, 4 drawer, ECB82D4, 82", chef base
Everest: ECB82D4 – 82″ (4) Drawer Chef Base Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when re-opening drawers. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ 16-gauge stainless steel worktop is built with unique air chamber and vents that channel heat produced by mounted cooking equipment away from the unit. Additional layer of high grade insulation material withstands extreme heat. These features prevent the worktop from heat-induced warping, keep the cabinet cold and reduce overall energy costs. ∙ Thick gauge stainless steel corner guards keep mounted cooking equipment from sliding off the worktop. ∙ Heavy duty stainless steel grips provide secure maneuverability for the unit. ∙ 12-gauge metal caster brackets support additional weight of mounted cooking equipment. ∙ Six 5" swivel casters with locks on front set and two front leg stabilizers. ∙ A minimum clearance of 6” is required between the cooking equipment’s heating element and the Chef Base worktop. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings. ∙ Snap-in, heat resistant, magnetic drawer gaskets make cleaning and replacement an easy process. ∙ High strength, recessed drawer handles. ∙ NSF certified polycarbonate 4" deep pans. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

90", EBB90G-SD, sliding glass door, back bar cooler, everest
90", EBB90G-SD, sliding glass door, back bar cooler, everest
Everest: EBB90G-SD – 90″ Sliding Glass Door Back Bar Refrigerator 24″ Depth
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel countertop with textured laminate, black vinyl exterior. ∙ Galvanized steel interior walls and high quality stainless steel floor. ∙ 1 3/4" thick high density polyurethane insulation. ∙ Built-in caster thread receptacles for all models. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Low emissivity double glass panes reflect UV rays for efficient cooling. ∙ Black PVC door frames. ∙ Self-closes by weight. ∙ Removable doors and stainless steel door tracks make cleaning an easy process. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. ∙ Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

48", everest, side mount, ETR2, undercounter refrigerator
48", everest, side mount, ETR2, undercounter refrigerator
Everest: ETR2 – 48″ Side Mounted Undercounter/Worktop Refrigerator
  ∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal circulation of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ 16 gauge, high quality stainless steel worktop. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ Four 5" swivel casters with locks on front set. ∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Frame heaters prevent exterior moisture build up. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

everest, refrigerated sushi case, 4', right mount, ESC47R
everest, refrigerated sushi case, 4', right mount, ESC47R
Everest: ESC47R – 4′ Refrigerated Sushi Case
  ∙ Self-contained condensing unit uses environmentally friendly, EPA compliant R290 refrigerant wit
∙ Self-contained condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Right or left mounted to suit installation preference. ∙ Rear condenser airflow intake and side louver exhaust promote efficient ventilation. ∙ Top to bottom evaporator tubes provide balanced cooling. Top evaporator is tri-looped and nickel plated copper tube. Bottom evaporator is located under the stainless steel floor. ∙ Corrosion-resistant condenser coil. ∙ Electronically commuted (ECM) condenser fan motor achieve rapid cooling with less energy consumption. ∙ Removable and washable condenser coil air filter. ∙ Exterior on/off power switch. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Wide single piece, curved glass display window offer a panoramic view of items. ∙ Heavy duty, ABS plastic exterior casing. ∙ Black coated steel housing for condensing unit. ∙ Stainless steel floor interior has rounded edges has rounded corners and two drain holes for ease of cleaning. ∙ High density, foamed-in-place insulation. ∙ 6 3/4” high removable sliding glass doors for storage accessibility and ease of cleaning. ∙ Durable plastic trays have two mounting styles which offer medium to low temperature coverage. ∙ Factory preset temperature of 38°F at an ambient temperature of 80°F. (no controls equipped) ∙ NSF certified thermometer.