• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 BTU burners
• Heavy duty burners with a standing pilot for open top burners
• Heavy duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
Additional Information
Weight
180 lbs
Dimensions
27.6 × 36 × 13.1 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ACHP-6 – HD 36” Six Burner Hotplate with Total 192,000 BTU” Cancel reply
• Stainless steel exterior and interior
• Welded stainless steel tank
• Heavy duty burners w
• Stainless steel exterior and interior
• Welded stainless steel tank
• Heavy duty burners with a standing flame, standby pilots
• High quality thermostat maintains select temperature automatically between 200°F-400°F
• Oil cooling zone in the bottom of the tank captures food particles and extends oil life
• Safety valve with an automatic voltage stabilizing function
• Self-reset high temperature limiting device
• Two (2) Nickel plated baskets with coated handles standard
• Wire mesh crumb screen and basket hanger standard
• Available in Natural & Propane Gas
• 3/4 ” NPT rear gas connection and regulator
• Four (4) Casters standard
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
5 YEARS OIL TANK WARRANTY
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’
• Fully insulated wells—all four sides and bottom of wells are insulated by fiberglass, 8’’ deep, dry heating style
• Temperature control—individual infinite switch controls each well
• Two type heat elements—500 watt per well and 750 watt per well
• Stainless steel die-stamped opening—12”x20”, rising lip around well can keep well clean, and food pan to be easy to load and unload
• Poly cutting board-7” wide x 1/2” thick with 18 gauge stainless steel support shelf and brackets
• 18 gauge stainless steel top, body and under shelf
• Stainless steel tubular legs with adjustable stainless steel feet, getting table strong structure
• Indicator light of each well shows both power on and element heating
• Mechanical guards on all switches for safety and reliability
• Although intended for dry use, these steam table can be used wet with a compatible spillage pan(sold separately)
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless stee
• Bottom mount compressor units with environmentally friendly R290 refrigerant
• Stainless steel exterior & interior
• Digital controller
• Maintains temperatures between -8°F – 0°F
• LED interior light(s)
• Recessed door handle(s)
• Door lock(s) standard
• Magnetic door gasket(s) standard for positive door seal
• Pre-installed casters
• Three(3) pre-installed shelves per section
• Down duct refrigeration to ensure even distribution of air
• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital con
• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital controller
• Maintains Temperatures between 34°F – 40°F degrees
• Heavy Duty Embraco Controller with environmentally friendly R290 Refrigerant
• Heavy Duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed castors
• One-Piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
2 Year Labor and Parts Warranty
5 Year Compressor Warranty
Reviews
There are no reviews yet.