• Stainless steel exterior and interior
• Dual valve controls for left and right-side independent operation
• Two (2) 21,500 BTU high efficiency ceramic infrared burners and standby pilots – totals 43,000 BTU’s
• 1 minute pre-heat time
• 4 position rack adjustments on salamander broiler
• One (1) removable broiler chrome rack
• Removable crumb/grease tray
• Wall mounts directly to the wall without a mounting kit
• Range mounting kit included
• 3/4” NPT rear gas connection and regulator standard
1 Yr Warranty on all Parts and Labor (US Only)
Additional Information
Weight
168.6 lbs
Dimensions
18 × 36 × 17.33 in
Warranty
1 YR WARRANTY ON ALL PARTS AND LABOR
Reviews
There are no reviews yet.
Be the first to review “Atosa: ATSB-36 – 36″ Salamander Broiler with Total 43,000 BTU”
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Front air breathing for flexibility in installation.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop, lid and hood.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Thick gauge, stainless steel drawer frames with low-friction ball bearings.
∙ Self-closing door with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
∙ High strength, recessed door and drawer handles.
∙ NSF certified polycarbonate 6" deep pans.
∙ 1/2” thick, foam insulated lid keeps top pan area cold and prevents moisture build-up.
∙ 12 1/4” deep cutting board is removable for ease of cleaning.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
•
• Stainless steel exterior including front, back sides, kick plate, back guard and over shelf
• Heavy duty 12” X 12” removable, cast iron top grates
• Drip tray provided under burners to catch grease drippings
• 32,000 BTU top burners & 27,000 BTU oven burners
• Oven temperature range between 175°F to 550°F
• Standing pilot for open top burners
• Oven pilot with 100% safety shut off
• Enamel interior oven for easy cleaning
• Multiple position oven rack guides
• Two(2) chrome oven rack per oven standard
• Available in Natural and Propane
• 3/4” NPT rear gas connection and regulator provided
• Four(4) casters standard
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 B
• Stainless steel exterior & interior
• Stainless steel full width crumb tray
• 32,000 BTU burners
• Heavy duty burners with a standing pilot for open top burners
• Heavy duty cast iron top grates
• Independent manual controls for each burner
• Stainless steel legs standard
• 3/4” NPT rear gas connection and regulator standard
1 YR WARRANTY ON ALL PARTS AND LABOR (US ONLY)
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environment
∙ Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system ensures optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Open spaced interior with no walls between compartments.
∙ 16 gauge, high quality stainless steel worktop.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
∙ R290 models include audible overheat protection alarm for compressor and condenser coil.
Reviews
There are no reviews yet.