Freezer, reach-in, one-section, 20 cu. ft., self-contained refrigeration, stainless steel front, aluminum interior & ends, standard depth, full-height solid door, cylinder lock, LED interior lighting, electronic control with digital display, unit can be adjusted to operate as low as -10°F, hi-low alarm, electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/2 HP, cETLus, NSF, Made in USA, ENERGY STAR®
∙ Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environme
∙ Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
∙ Full-length air duct system and airflow guard ensure optimal circulation of cold air.
∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ Galvanized steel top, bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Deeper cabinet interior for more storage options.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Field reversible.
∙ Three epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
∙ Audible overheat protection alarm for compressor and condenser coil.
∙ Side mounted, self-contained and retractable condensing unit uses environmentally friendly R404A
∙ Side mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant.
∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
∙ R290 models include full-length air duct system.
∙ Time-initiated and temperature-terminated auto defrost heater for freezers. Air defrost for refrigerators.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Removable and washable condenser coil air filter for R404A models. R290 models do not require condenser coil air filters.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
∙ 16 gauge, high quality stainless steel worktop.
∙ Galvanized steel bottom and rear.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set.
∙ Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
∙ Heavy duty stainless steel interior / exterior.
∙ 2.5" thick high density polyurethane insulation.
∙ Frame heaters prevent exterior moisture build up.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, recessed door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Two epoxy coated, steel wire shelves per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33°F to 54°F for refrigerators and -10°F to 54°F for freezers.
∙ R290 models include audible overheat protection alarm for compressor and condenser coil.
∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R40
∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant.
∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models.
∙ Airflow guard ensures optimal circulation of cold air. R290 models include full-length air duct system.
∙ Time-initiated and temperature-terminated hot gas defrost cycle saves on energy.
∙ Large capacity, corrosion-resistant condenser and evaporator coils.
∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
∙ Removable and washable condenser coil air filter for R404A models. R290 models do not require condenser coil air filters.
∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors.
∙ Pre-wired power cord without plug, 230V/60Hz/1Ph.
∙ Heavy duty white coated steel interior / exterior.
∙ Open spaced interior with no walls between compartments.
∙ Stainless steel floor interior has rounded corners and detachable drain plug for ease of cleaning.
∙ 2.5" thick high density polyurethane insulation.
∙ Four 5" swivel casters with locks on front set and two front leg stabilizers.
∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.
∙ Low emissivity double glass panes reflect UV rays for efficient cooling.
∙ Matte finish aluminum door frames.
∙ Frame heaters prevent exterior moisture build up.
∙ Defroster strips keep glass planes clear and fog-free.
∙ Self-closing with adjustable torsion system for a positive seal.
∙ Snap-in magnetic door gasket make cleaning and replacement an easy process.
∙ High strength, die-cast door handles.
∙ Pre-installed door locks keep your items safe from theft.
∙ Four epoxy coated, steel wire shelves with airflow guard per section.
∙ Height adjustable stainless steel clips.
∙ Multi-function digital controller with easy to read LED display.
∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
• BOTTOM MOUNT COMPRESSOR - THE BOTTOM MOUNT COMPRESSOR PROVIDES QUICK AND EASY MAINTENANCE
• BOTTOM MOUNT COMPRESSOR - THE BOTTOM MOUNT COMPRESSOR PROVIDES QUICK AND EASY MAINTENANCE
• STAINLESS STEEL INTERIOR AND EXTERIOR - QUALITY STAINLESS STEEL HELPS MINIMIZES DENTS, SCRATCHES AND RUST
• STANDARD REAR WALL AIR GUARD ENSURES PROPER AIR FLOW AND COOLING
• EVAPORATOR FAN STOPS AUTOMATICALLY WHEN DOOR IS OPENED
• RECESSED DOOR HANDLES - OUR RECESSED DOOR HANDLES HELP PREVENT SHIPPING DAMAGE AND BREAKAGE
• STANDARD DOOR LOCKS
• DURABLE DOOR GASKET WITH EASY REPLACEMENT
• INTERIOR INCANDESCENT LIGHT
• CFC FREE HIGH DENSITY CELL POLYURETHANE INSULATION
• DIGITAL TOTAL MONITORING SYSTEM - OFFERS AN AUTOMATIC DOOR ALARM SYSTEM, EASY TEMPERATURE ADJUSTMENT AND A SIMPLE TO CONTROL DEFROST CYCLE
• 4” DIAMETER SWIVEL CASTERS WITH FRONT BRAKES
• ALL MODELS ACCOMMODATE FULL SIZE BUN SHEET PANS
• 4 SHELVES PER EACH DOOR SECTION WITH 1“ ADJUSTABLE SHELVING HEIGHT
• SELF-CLOSING AND STAY OPEN DOORS - DOORS REMAIN OPEN AT 120° AND AUTOMATICALLY CLOSE AT 96°
• DOOR OPEN WARNING ALARM
• FIELD REVERSIBLE DOOR (ADDITIONAL KIT REQUIRED) - BASF1 AND BASR1 MODELS ONLY
Reviews
There are no reviews yet.