Related Products

swing glass door, EMSGR69C, everest, merchandiser
swing glass door, EMSGR69C, everest, merchandiser
Everest: EMSGR69C – Reach-In (3) Swing Glass Door Chromatography Refrigerator
  ∙ Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environme
∙ Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. ∙ Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption. ∙ Full-length air duct system ensures optimal distribution of cold air. ∙ Time-initiated and temperature-terminated auto defrost cycle for seamless operation. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty white coated steel interior / exterior. ∙ Stainless steel floor interior has rounded corners and detachable drain plug for ease of cleaning. ∙ 2.5" thick high density polyurethane insulation. ∙ Six height adjustable screw legs. ∙ Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output. ∙ Low emissivity double glass panes reflect UV rays for efficient cooling. ∙ Black PVC door frames. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, die-cast door handles. ∙ Four epoxy coated, steel wire shelves with airflow guard per section. ∙ Height adjustable stainless steel clips. ∙ Two access ports (one on each side wall) for running lines or cords. Includes heavy duty covers with lockable tabs. ∙ Duplex GFCI electrical outlet inside cabinet interior provides power for stirring devices and other equipment. Includes water proof cover. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F. ∙ Audible overheat protection alarm for compressor and condenser coil.

tall, vertical, EOMV-48-W-35-T, 48", everest, display merchandiser
tall, vertical, EOMV-48-W-35-T, 48", everest, display merchandiser
Everest: EOMV-48-W-35-T – Tall Vertical Open Display Merchandiser
  · Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmen
· Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing. · Front air intake and rear air discharge design allows side by side installation. · Conforms to NSF Standard 7 TYPE ll (maximum ambient temperature 80°F). · Electronically commutated (ECM) evaporator fan motors achieve rapid cooling with less energy consumption. · High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner's manual for full maintenance instructions. · Large capacity, corrosion-resistant condenser and evaporator coils. · Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. · Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-20P. · Black or white modern exterior has moisture-resistant panels and field- replaceable tempered glass. · Heavy-duty stainless steel interior has perforated back wall for efficient air flow. Includes floor drains for ease of cleaning. · Galvanized steel top, bottom and rear. · 2.5" thick high-density polyurethane insulation. · Integrated retractable night curtain saves energy and provides security. · 5" swivel casters with locks on front set. Leg stabilizers standard for all models. · Shielded LED bar lighting under shelves and canopy provide bright, high color illumination at lower heat output. On/off switch saves energy · Adjustable by height and angle. Position it flat or slanted downward at 10°. · Heavy duty stainless steel shelves include price tag moldings. · Factory preset temperature of 35°F maintains a combined average product temperature of 40°F or less. · Audible overheat protection alarm for compressor and condenser coil. · Conforms to NSF standard 7 TYPE ll designed to operate in an air-conditioned environment where temperature and humidity do not exceed 80°F and 55% relative humidity. · Must not be installed near ventilation systems, fans or exterior doors or windows that will disrupt the air curtain and compromise the function of the cabinet. · Must not be installed in direct sunlight. · In built-in applications, a distance of 6" is required on the front, back and top exterior for ventilation purposes.

everest, 72", ETBF3, undercounter freezer
everest, 72", ETBF3, undercounter freezer
Everest: ETBF3 – 72″ Undercounter/Worktop Freezer
  ∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R40
∙ Bottom mounted, self-contained and retractable condensing unit uses environmentally friendly R404A* refrigerant with zero (0) Ozone Depletion Potential (ODP) and EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). R290 condensing units are replaceable and require no on-site brazing. *Ask about alternative refrigerant. ∙ Front air breathing for flexibility in installation. ∙ PSC evaporator fan motors for R404A models. Electronically commutated (ECM) fan motors for R290 models. ∙ R290 models include full-length air duct system. ∙ Time-initiated and temperature-terminated defrost cycle with defrost heater. ∙ Large capacity, corrosion-resistant condenser and evaporator coils. ∙ Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters. ∙ High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions. ∙ Pressure relief devices allow smooth access to cabinet interior when reopening doors. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace. ∙ 16 gauge, high quality stainless steel worktop. ∙ Galvanized steel bottom and rear. ∙ 2.5" thick high density polyurethane insulation. ∙ Four 5" swivel casters with locks on front set. ∙ Heavy duty stainless steel interior / exterior. ∙ 2.5" thick high density polyurethane insulation. ∙ Frame heaters prevent exterior moisture build up. ∙ Self-closing with adjustable torsion system for a positive seal. ∙ Snap-in magnetic door gasket make cleaning and replacement an easy process. ∙ High strength, recessed door handles. ∙ Pre-installed door locks keep your items safe from theft. ∙ Two epoxy coated, steel wire shelves per section. ∙ Height adjustable stainless steel clips. ∙ Multi-function digital controller with easy to read LED display. ∙ Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F. ∙ R290 models include audible overheat protection alarm for compressor and condenser coil.

everest, refrigerated sushi case, left mount, 7', ESC83L
everest, refrigerated sushi case, left mount, 7', ESC83L
Everest: ESC83L – 7′ Refrigerated Sushi Case
  ∙ Self-contained condensing unit uses environmentally friendly, EPA compliant R290 refrigerant wit
∙ Self-contained condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Right or left mounted to suit installation preference. ∙ Rear condenser airflow intake and side louver exhaust promote efficient ventilation. ∙ Top to bottom evaporator tubes provide balanced cooling. Top evaporator is tri-looped and nickel plated copper tube. Bottom evaporator is located under the stainless steel floor. ∙ Corrosion-resistant condenser coil. ∙ Electronically commuted (ECM) condenser fan motor achieve rapid cooling with less energy consumption. ∙ Removable and washable condenser coil air filter. ∙ Exterior on/off power switch. ∙ Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P. ∙ Wide single piece, curved glass display window offer a panoramic view of items. ∙ Heavy duty, ABS plastic exterior casing. ∙ Black coated steel housing for condensing unit. ∙ Stainless steel floor interior has rounded edges has rounded corners and two drain holes for ease of cleaning. ∙ High density, foamed-in-place insulation. ∙ 6 3/4” high removable sliding glass doors for storage accessibility and ease of cleaning. ∙ Durable plastic trays have two mounting styles which offer medium to low temperature coverage. ∙ Factory preset temperature of 38°F at an ambient temperature of 80°F. (no controls equipped) ∙ NSF certified thermometer.